Epson Printer Not Printing After Changing Ink?

Epson Printer Not Printing After Changing Ink

Learn Easy Troubleshooting for Epson Printer Not Printing After Changing Ink?

Have you recently changed an ink cartridge from your Epson printer with a new one? But suddenly your printer has stopped printing and showing some invalid error? Then don’t think too much about that as you are not alone who is facing this issue as thousands of users confront this problem after changing their ink. There could be numerous reasons behind this problem of not printing on the Epson printer and you will be supposed to fix this problem as soon as possible in order to get back to complete your printing task. In this blog, you will very easily learn about the reasons and fixes for the not printing issue of the Epson printer after changing ink.

Why is My Epson Printer not Printing After Changing Ink?

If your Epson printer won’t print after changing ink cartridge, then it may cause due to plenty of reasons and some of them are listed below:

  • Due to improper lever position.
  • Outdated printer chip.
  • Incompatible cartridge.
  • Printer offline issues.
  • Other hardware problems.
  • Faulty or outdated printer driver.
  • Installing cartridge with power off.
  • Low level of ink.

All of the reasons may cause the Epson printer will not print after changing ink and there might be others. After checking these causes, you can troubleshoot your printer problems very easily and there are lots of solutions to get rid of this issue that you can apply in a very simple and effective manner.

How do I fix my Epson Printer not Printing After Changing Ink Cartridge?

If you are facing not printing problems in the Epson printer after changing the new cartridge in your printer, then don’t worry about that as there are multiple ways to fix this issue. You can follow the below steps to fix this issue of the Epson printer:

Method 1# Check the Protective Tape

Make sure that you have removed the protective tape from the cartridge because if there would be any protective tape in the cartridge nozzles, then your printer would not print. You also ensure that no other sticker is removed from your printer else.

Method 2# Update Printer Drivers

Sometimes faulty or outdated printer drivers may also cause plenty of technical issues and if you have improper printer drivers, then you can update the driver to the latest version that can fix this problem of not printing in a very simple manner.

Method 3# Reset Printer

Resetting your Epson printer may resolve plenty of issues and you can also fix the not printing issue after changing ink can be fixed after resetting your printer in a very quick and effective manner for the varied problems.

Method 4# Clean Printer Heads

Dirty printer heads may lead to plenty of problems and if you are getting this issue, then make sure that your printer head is in a clean position. You can clear printer heads with the help of the below steps:

  • First of all, open the Control Panel on your computer.
  • Click on Hardware and sound option.
  • Now click on the Devices and Printers section.
  • Now right-click on Epson printer and then choose Printing preferences.
  • After that, click on the Head Cleaning option and then wait for fewer minutes until the printer head cleaning.

You can fix the Epson printer not printing after changing ink cartridge very smoothly after following the above-given steps. But in case you are still facing this error in your Epson printer or have any other issue, then you can troubleshoot this problem with the help of the customer support team of the Epson printer.

Leave a Comment

Your email address will not be published.

  1. Avatar
    How to Fix Epson Printer Ink Problem? - 2020-05-08 10:28:00
    […] were the ways to solve if the Epson Printer not printing after changing ink if still the issue is same then go to the website for more information or talk to a representative […]

    Reply to How to Fix Epson Printer Ink Problem? -

  2. Avatar
    Nas 2020-06-25 03:44:00
    my Epson XP 345 only print in red, after putting new ink. I have tried cleaning head and nozzles and checked that the inks are properly fitted and that I have removed the little yellow tag. but still, I have the same problem.
    Can you help me with this problem, please?

    Reply to Nas

  3. Avatar
    Harvey McMeekin 2020-09-17 04:07:00
    I have cleaned my previously clogged print head and ink is flowing in all colors but only leaves long continuous smudge instead of a clear image of the "nozzle check" page. Any other printable pages are just swatches of "all inks". Wish I could send you a jpeg shot of said. Any suggestions? Thanks

    Reply to Harvey McMeekin

  4. Avatar
    Maureen 2020-10-29 02:35:00
    Tried it all and it is still not printing. It goes thru the motions but when the paper comes out it is BLANK.

    Reply to Maureen

  5. Avatar
    Ci 2020-11-02 02:18:00
    Same issue looking for a resolution as well

    Reply to

  6. Avatar
    Jono 2020-11-18 07:58:00
    The same for me, cleaned print heads. printer less than 6 months old and is rubbish

    Reply to

  7. Avatar
    Lilly turner 2021-02-08 09:39:00
    Hi, I have an Epson XP-335 and mine is doing the same. Sounds and acts like printing, full cartridges and it's blank. I've redone drivers, restored settings, and done all the head cleaning, etc, and nothing. Did you find a resolution in the end? Thank you

    Reply to

  8. Avatar
    Laurent Heyligen 2021-07-16 03:42:00
    The same problem here changed the black cartridge (with an original one), and since then nothing, XP-345 is only 4 years old. This is my second Epson printer, but definitely my last one.

    Reply to

  9. Avatar
    Ian Hubbard 2020-12-05 09:48:00
    My XP-245 doesn't black despite replacing the cartridge. Tried to do everything mentioned on this page. When I run the nozzle check print, the black column is blank. What else can I do?

    Reply to Ian Hubbard

  10. Avatar
    Breanna Kimes 2020-12-17 09:40:00
    My problem is the printer is fine. I can print from it from other devices and make copies. However, the device that was active when it ran out of ink won't recognize the change. I have closed and restarted the programs and printer. No change. It's kinds of like the computer is holding a grudge and refusing to forgive the grievance. Of course, I know that isn't true, but I just don't know how else to describe it.

    Reply to Breanna Kimes

  11. Avatar
    Whittybk 2020-12-16 13:52:00
    I am facing the same problem. Does anyone have any suggestions other than buying a new printer?

    Reply to Whittybk

  12. Avatar
    Dianne Sawyer 2020-12-24 07:25:00
    I cannot get black or yellow to print, any ideas on how to fix it?

    Reply to Dianne Sawyer

  13. Avatar
    Sandi 2021-03-22 16:55:00
    Did the Epson somehow download an update so that I can't print with replacement (non-Epson) ink?

    Reply to Sandi

  14. Avatar
    Karen 2021-03-27 07:26:00
    I have the Epson ET 2760. I added ink to it but it is not flowing into the printhead. How can I get my ink into the printhead?

    Reply to Karen

  15. Avatar
    George Atkinson 2021-04-09 08:35:00
    I changed the black ink cartridge but now it doesn't print text. It does print photos or graphics like a screen print on my iPhone

    Reply to George Atkinson

  16. Avatar
    William F. Goodnight 2021-04-23 15:38:00
    This Epson XP 640 is fairly new, I installed new Epson ink and still no success. Very disappointed with the Epson XP 640 very sad.

    Reply to William F. Goodnight

  17. Avatar
    Devera Bailey 2021-05-18 15:15:00
    Changes black ink now won't print in black but will print black in a picture why?

    Reply to Devera Bailey

  18. Avatar
    Roy Farley 2021-09-17 01:27:00
    Have an Epson XP 900 printer that when I print from a general screen i.e an advert the colours come out a near-perfect match yet when I print from photoshop either printer manage colour or ps manage colours it prints very dark.

    Reply to Roy Farley

  19. Avatar
    Laurie Dehner 2022-04-10 18:29:00
    Printing blank pages, I've tried all the recommendations.

    Reply to Laurie Dehner

Disclaimer: is an online information provider website. Printer Support Plus has no association with any brand name. Brand names, logo, trademark utilized in the content or site is just for user's information purpose. In case if you have found any kind of issue with the website or content kindly mail at